Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Safety instructions
!
22
Note!
This symbol draws attention to activities or procedures that have an indirect effect on operation, or
can trigger an unforeseen unit reaction if not carried out properly.
ESD - Electrostatic discharge
Protect the terminals against electrostatic discharge. Failure to comply with this instruction can
result in the destruction of parts of the electronics.
2
Identification
2.1
Device designation
2.1.1
Nameplate
Compare the nameplate on the device with the following graphic:
1
2
3
ƒig. 1:
Nameplate of the TA20J (example with transmitter and display)
2.2
Certificates and approvals
The TA20J is designed to meet state-of-the-art safety requirements, has been tested and left the fac-
tory in a condition in which it is safe to operate. The device complies with the applicable standards
and regulations in accordance with EN 61 010 "Protection Measures for Electrical Equipment for
Measurement, Control, Regulation and Laboratory Procedures". The device described in these Ope-
rating Instructions is therefore in conformity with the statutory requirements of the EU Directives.
3
Installation
3.1
Installation conditions
3.1.1
Dimensions
~163
30
90
ƒig. 2:
Overall dimensions for wall mounting (in mm)
4
5
6
75
10
62
1
Order code
2
Customer number
3
Serial number
4
Transmitter type
5
Design
6
Temperature unit
75
~153
10
30
62
90
Endress+Hauser
TA20J
Werbung
