Exsys EX-6124-2 Anleitung Seite 22

English EX-6124-2
4. Hardware Installation
+5V via serial port
You can apply +5V to pin 9 of each serial port individually to power compatible devices. To do this,
open the case and set the jumper of the relevant port to the +5V position.
Jumper
Caution!
Only change this setting if +5V is really needed for the peripheral device. For normal applications,
do not change the jumpers (position DIS), otherwise your equipment will be damaged!
© Copyright 2023 by EXSYS Vertriebs GmbH. All rights reserved
22