AEG NIG85M30AB Benutzerinformation Seite 171

Make sure you do not pack potatoes too
tightly.
• Avoid producing external vibrations (e.g.
from using a blender or placing a mobile
phone next to the hob) when the function
is running.
• Depending on the type of food and
cookware you can adjust the heat setting
after the boiling point has been reached.
• Add salt once the boiling point has been
reached.
• Use a lid to save energy.
6.16 FUNCTIONS: Melting
You can use this function to melt products,
e.g. chocolate or butter.
CAUTION!
Do not leave the hob unattended while
the function is operating.
1. Place cookware on the cooking zone.
2. Select FUNCTIONS > Melting.
3. Set a timer function, if needed.
4. Touch OK.
To stop the function manually touch
upper left corner of the display.
6.17 Dishes
This function helps you prepare different
foods using preset programs dedicated to
specific food categories. The availability of
programs depends on the cooking zone.
CAUTION!
Do not leave the hob unattended while
the function is operating.
1. Place cookware on the cooking zone.
You can use a single cooking zone or
connect two side zones using Bridge.
2. Select Dishes.
3. Select the food type.
4. Set a timer function, if needed.
5. Follow the instructions on the display.
Depending on the food type and the selected
program you can set and modify details, e.g.
level of doneness, level of heat for frying, etc.
Hints and tips:
• The most often cooked dishes are
automatically added to the list of Most
Cooked.
• Some dishes have long names which
cannot be fully displayed on the list. To
view the full name of a dish, touch "...".
• You can manually add programs to the list
of Favourites
• You can hide certain programs by
touching
to Settings > Setup > Dishes.
6.18 Hob²Hood
It is an automatic function which connects the
hob to a suitable hood. Both the hob and the
hood have an infrared signal communicator.
The speed of the fan is defined and adjusted
automatically based on the mode setting and
the temperature of the hottest cookware on
the hob. You can also operate the fan
manually from the hob or the hood itself.
If you change the fan speed on the hood,
the default connection with the hob will
in the
be deactivated. To reactivate the
function, turn both appliances off and on
again.
In some hoods the function might be
disabled by default. In such cases,
activate the function first on the hood,
then on the hob. For more information
refer to the hood user manual.
Setting the automatic fan mode
To set the hood to an automatic mode,
choose between the following set fan speeds:
Mode 2 - Mode 6. The hood reacts whenever
you operate the hob. You can set the hob to
activate only the light by selecting Mode 1.
1. Touch
2. Select Settings > Hob²Hood.
3. Turn a switch on to activate the hood.
All automatic modes appear as a list.
4. Choose the mode.
5. Touch
leave.
.
. To restore the programs, go
.
or to save the selection and
ENGLISH 171