Werbung
Verfügbare Sprachen
Verfügbare Sprachen
C L E A N I N G / H Y G I E N E
5.
6.
7.
8.
9.
Use the Filling Chamber Tool
to press the Setting Wheel
out of the Cooling Unit.
Unscrew the Cooling Unit
Base from the Vaporizer by
turning it 90° counterclock-
wise.
Lever out the large Base Seal
Ring with Filling Chamber
Tool at the recess in the
groove.
Carefully press out the Screen
from above using a cotton
swab.
Place all parts of the Cooling
Unit in warm rinsing water.
Alternative: Soak all parts of
the Cooling Unit in isopropyl
alcohol for a maximum of 1/2
hour. Rinse all parts under
running water for at least
one minute. Let all parts dry
completely.
21
en
Werbung
