Axkid ENVIROBABY Bedienungsanleitung Seite 10

Thank you for choosing AXKID ENVIROBABY
Read this instruction manual before installing AXKID ENVIROBABY car seat in your vehicle.
For more information and installation videos visit www.axkid.com.
AXKID ENVIROBABY is an infant rear-facing car seat approved for
children with a height between 40-75cm with a maximum weight of 13kg.
This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No. 129, for use in, i-Size
compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle user' s manual. If in doubt,
consult either the Enhanced Child Restraint System manufacturer (www.axkid.com) or the retailer.
Important information
To maximize your child' s safety, it is important that you keep the following in mind:
• Always follow the instructions in this manual. An incorrect installation may seriously affect the safety for your child. If in doubt,
contact your retailer who can demonstrate a correct installation.
• Keep this instruction manual for future reference. If manual is lost, you can find it online at www.axkid.com
• Do not use AXKID ENVIROBABY and compatible base in a seating position where an active frontal airbag is fitted. If you still wish to
install the Axkid infant car seat in this location the airbag must be switched off according to the vehicle manufacturers instructions.
• Should you have an accident, no matter how small, your child car seat should always be replaced. It may have damage that is non
visible and could seriously affect the safety of your child. For this reason, Axkid does not recommend purchasing second hand car
seats.
• If AXKID ENVIROBABY has been exposed to direct sunlight, make sure that the car seat is not too hot before installing your child.
• Never leave your child unattended in the vehicle.
• Ensure that any luggage or loose objects are secured in your vehicle as they may cause injuries to passengers in the event of an
accident.
• Ensure that the AXKID ENVIROBABY is installed in a way where no parts become trapped by movable seats, car doors, etc.
• AXKID ENVIROBABY may only be installed rear-facing.
• Always make sure that the harness is adjusted to correctly fit your child' s body. The harness is adjusted by moving the belt height
carrier using the belt height adjustment knob.
• Make sure that the child' s back is pushed against the infant car seat when restraining you child with the harness.
• Always make sure that the harness is firmly tightened against your child and that the buckle is completely locked. You should not be
able to pinch the straps.
• Make sure there is no twist in the harness.
• If using AXKID ENVIROBABY with the compatible AXKID ENVIROBASE, always make sure the support leg is in its correct position
and have contact with the vehicle floor. Check that the indicator on top of the support leg is green and that you don't hear any
beeping sound from the support leg foot.
• Do not attempt to disassemble nor modify any part of AXKID ENVIROBABY. The warranty and and the safety performance of the
AXKID ENVIROBABY could be affected if doing so.
• Never use AXKID ENVIROBABY without the seat textile cover. The textile cover is a safety feature and may only be replaced with
an original seat textile cover.
• Read the vehicle handbook and the vehicle list at www.axkid.com to find which seating positions are suitable for this car seat.
• Axkid recommends to always use a seat protection to protect your vehicle seat from scratches and dirt.
• If you have any doubts, contact the retailer where the base and compatible car seat was purchased or contact info@axkid.com.
10