Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Declaration of Confirmity
1. EG Declaration of Confirmity
We, ESU electronic solutions ulm GmbH & CO KG, Edisonalle 29,
D-89231 Neu-Ulm, declare in sole responsibility that the product
Product description: ECoSBoost
Part number: 50012
complies with all relevant regulations of the Directive for Electro-
magnet Compatibility (2004/108/EG). The following harmonised
standards have been applied:
EN 55014-1:2006 + A1:2009: Electromagnetic Compatibility - re-
quirements for household appliances, electric tools, and similar
apparatus - Part 1: Emission - Product
EN 55014-2:1997 + A1:2001 + A2:2008 : Electromagnetic Com-
patibility - Requirements for household appliances, electric tools,
and similar apparatus - Part 2: Immunity - Product family standard.
2. WEEE-Declaration
Disposal of old electrical and electronic devices (applicable in the
European Union and other European countries with separate coll-
ection system).
This mark on the product, the packaging or
the relevant documentation indicates, that
this product may not be treated as ordinary
household garbage. Instead this product has
to be delivered to a suitable disposal point
for recycling of electrical or electronic equip-
ment. By disposing of this product in the ap-
propriate manner you help to avoid negative
impact on the environment and health that
could be caused by inappropriate disposal.
Recycling of materials contributes to conserve our natural envi-
ronment. For more information on recycling this product please
contact your local administration, the rubbish disposal service or
the shop where you have purchased this product.
Batteries do not belong into household trash!
Please do not dispose of discharged batteries in your household
trash: take them to a collection point at your local town hall or
dealer. Thus you assure an environmentally friendly way of dis-
posal.
3. Important Remarks-Please read this chapter first
We congratulate you to your purchase of an ESU ECoSBoost di-
gital amplifier.
This manual will guide you step by step through the multitude of
possibilities of the ECoSBoost. However, have one request:
Please read this manual carefully prior to initial operation. Alt-
hough the ECoSBoost is robustly constructed there is the risk of
damage due to incorrect wiring. If in doubt, avoid any „costly"
experiments!
• ECoSBoost is only intended for the use with electrical model
train layouts. Never operate ECoSBoost without paying atten-
tion and never use it for controlling devices designed for trans-
porting persons.
• ECoSBoost is not a toy. Make sure that children use this device
only when adults are present.
• Only use the power supply provided for ECoSBoost. Other
transformers may lead to reduced output or in extreme cases
to damage of the command station.
• Use the power supply provided with ECoSBoost for the energy
supply for ECoSBoost only and not for any other household
appliances.
• Never use Y-adapters in order to provide power to other devices
for your model trains! An unintended connection to ground
could lead to damage or destruction of your ECoSBoost or the
connected command station!
• Check the power supply regularly for damage on the housing
or the main cable. Damaged parts may not be used under any
circumstances! Do not attempt to repair the power supply!
This may be fatal!
• Assure adequate ventilation of the power supply. Do not install
in furniture without sufficient air circulation since this could
lead to overheating or fire!
• Assure adequate ventilation of the ECoSBoost. Do not install in
furniture without sufficient air circulation since this could lead
to overheating or fire!
• ECoSBoost may only be operated with the devices described
in this manual. Even if other devices (also from other suppliers)
may have the same plugs and sockets does this not automa-
tically indicate that such devices may be operated with ECoS-
Boost. Any other use as described here is not permitted.
• Adhere to the wiring diagrams shown in this manual when
connecting your layout. Other circuitry could lead to damage
of ECoSBoost or your command station.
• Do not drop your ECoSBoost command station or subject it to
mechanical impact or vibrations. Such rough treatment could
cause breakage of components within the device.
• Never expose your ECoSBoost to rain, humidity or direct sun-
light. In case of high temperature variations (e.g. when you
take your ECoSBoost from the cold car to your comfortably
heated house) please wait for a few hours until the device has
adjusted to the temperature before switching it on.
3
Werbung
