Function - HomeMatic HM-PB-2-WM55-2 Montage- Und Bedienungsanleitung

Using the push button for any purpose other
than that described in this operating manual
does not fall within the scope of intended use
and shall invalidate any warranty or liability.
This also applies to any conversion or
modification work. This device is intended for
private use only.
Do not open the device. It does not contain
any parts to be maintained by the user. If an
error occurs, please send back the device to
the customer service.
3

Function

HomeMatic push buttons are used to control the recei-
vers that they are taught to work with. A single button
can be taught to work with one or more components
and address them all simultaneously. That means that
pressing a single button can execute many different
tasks.
The HomeMatic push button is battery-operated. As
such it is highly flexible where mounting and selecting
a mounting location are concerned.
26
The HomeMatic push button is mounted and removed
very easily using screws or adhesive strips. It is com-
patible with a number of different surfaces including
furniture, brick walls, tiles or glass. Holes or slits do not
have to be chiselled out of brick walls. The frame sup-
plied with the device can be used for wall mounting.
It is also possible to integrate the HomeMatic push
button into existing
switches (see sec. 6.4).
27