The long track rod beneath the loading area can bend if it is used to
support the CD2 Cargo.
-> Do not use the track rod to prop up the bike.
The frame could become scratched if the cargo bike is lain on its side.
-> Lay a blanket, for example, down on the ground to protect the contact
points of the CD2 Cargo.
5.6.2. Removing the rear wheel
•
Switch off the Bosch drive unit and remove the battery.
•
Lock the front wheel brake.
•
Prop up the vehicle under the motor rail,
using a beverage crate for example, so that
the rear wheel is raised completely off the
ground. Put a blanket between them.
•
Turn the twist grip to a position that provides
easy access to the control cable ends on the
hub interface.
•
Fold down the silver pull-stop snap lock from
the hub interface and remove it.
•
Lever the control cable end provided with
the silver bolt off the hub interface, e.g. with
a small screwdriver.
67