Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Check bearing clearance of hubs
•
Check bearing clearance of pedals
•
Ensure secure fixing of crank arms
•
Ensure secure seating of dust protection on the track rod ends and retighten as
required
Yearly (or every 3000 km)
•
Check complete brake system (including wear condition of brake discs)
•
Grease the pivot points of both brake levers
•
Check the tightening torques of the grips, brake levers, saddle, seatpost, stem,
handlebar
•
Check wear condition of the belt
•
Check clearance of the track rod ends
•
Inspect V-arms for cracks
•
Check tightening torque of "V-arms on frame" screws. Nominal: 70 Nm
•
Check tightening torque of "tubes beneath loading area" clamping screws.
Nominal: 14 Nm
5.3.
After an accident
If parts of the drive system (cable, motor, battery) are visibly damaged due
to an accident, there is a risk of electric shock.
-> In this case, remove the battery immediately. Have the drive system
checked by HNF-NICOLAI Service or a specialist retailer.
Parts of your vehicle may be damaged due to an accident, which can cause
a risk of breakage.
-> In case of an accident, contact HNF-NICOLAI Service or a specialist
retailer to have damaged parts such as the frame, fork, handlebar, stem,
seatpost, pedal cranks and pedals checked and replaced if necessary.
5.4.
Battery
During use, it is the performance requirements that primarily determine the service
life of the battery. Frequent use of high levels of assistance reduces the service life
of the battery.
65
Werbung
