Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.3 Bake/Roast
1. Turn on the power switch:
The power switch illuminates when it is pressed.
2. Set the thermostat to desired temperature:
When the temperature has been set, the heating indicator illuminates.
3. Load oven:
Once the oven is up to set point, open the door and load the oven with product. Avoid delays
in loading the oven with the door open, as this will delay the oven temperature recovery.
Note: The oven fan will stop working and the chamber light will illuminate when the door is
opened.
4. Set the bake timer to desired value:
To set the timer, turn the knob clockwise to required time. At any stage, the time could be
adjusted in either direction. For settings less than 10min, firstly set to a greater setting then
turn back to the desired time.
Note: This timer is completely independent of the oven control.
5. Water pipe connection (applicable for model YXD-6A-P only)
6. Light:
To view the product while baking, press the light switch on the control panel. The light will
stay on while the switch is latched in the on position.
7. Time up:
When the timer reaches 0min, the buzzer alarms and the BAKE TIMER indicator illuminates.
To cancel the buzzer, turn the timer fully counterclockwise to off position.
8. Unload oven:
Open the door and unload the oven.
Note: The oven fan will stop working and the chamber light will illuminate when the door is
opened.
5.4 Cook & Hold
1. Turn on the power switch:
The power switch illuminates when it is pressed.
2. Set the thermostat to desired temperature:
When the temperature has been set, the heating indicator illuminates.
3. Load oven:
Once the oven is up to set point, open the door and load the oven with product. Avoid delays
in loading the oven with the door open, as this will delay the oven temperature recovery.
Note: The oven fan will stop working and the chamber light will illuminate when the door is
opened.
4. Set the cook & hold timer to desired value:
This 3h timer is mechanically driven and is set by turning the timer knob clockwise to the
required time. At any stage, the time could be adjusted in either direction. The timer will
have no effect until the cook & hold switch is pressed (with the switch illuminated).
5. Press Cook & Hold switch:
The switch will illuminate and the timer is now effective.
6. Water pipe connection (applicable for model YXD-6A-P only)
www.combisteel.com
11
Werbung
