LD Systems MAILA SPA Bedienungsanleitung Seite 13

<
SPLAY ANGLES
Mounting on distance pole:
To enable the automatic calculation of the optimal spreading angles of the satellites, the
rotation of the display must be set correctly.
ROTATION menu item, status: standing
VOLUME
SPLAY ANGLES
The number of satellite speakers used is automatically detected by the module electronics if the status
ON is set in the menu item SATELLITES under AUTO DETECT . Alternatively, enter the corresponding SATELLITES
number of satellites manually under QUANTITY and deactivate the automatic detection (AUTO DETECT OFF).
EQUALIZER
To enter the relevant data of the audience area and the height at the measuring point, select SPLAY
DELAY
ANGLES in the main menu, confirm, then select the corresponding sub menu item and confirm again.
Select at Sat. Height the adequate value for the height of the bottom edge of the lowest satellite
VOLUME
measured from the audience's location and the distance from the array system to the back row of the
SPLAY ANGLES
audience (Coverage) in metres. Under Seated, enter standing (Seated OFF) or seated audience
(SeatedON). Now the optimal spreading angles for each satellite are automatically displayed.
SATELLITES
To exit the menu level, select the arrow symbol and confirm the selection.
EQUALIZER
The spread angles are set manually on the satellite speakers. The correct setting of the indicated
DELAY
spreading angles is a prerequisite for the optimal sound distribution across the indicated listening area.
VOLUME
SPLAY ANGLES
SATELLITES
EQUALIZER
DELAY
TRUSS MOUNTING:
VOLUME
SPLAY ANGLES
In order to enable the automatic calculation of the optimal spreading angles of the satellites
and the optimal suspension point of the EasyMount+ flight bar (for truss mounting), the
SATELLITES
rotation of the display display must be set correctly.
EQUALIZER
Menu item ROTATION, Status: flying
DELAY
The number of satellite speakers used is automatically detected by the module electronics if the status
ON is set in the menu item SATELLITES under AUTO DETECT . Alternatively, enter the corresponding VOLUME
number of satellites manually under QUANTITY and deactivate the automatic detection (AUTO DETECT OFF).
SPLAY ANGLES
To enter the relevant data of the audience area and the height at the measuring point, select SPLAY
SATELLITES
ANGLES in the main menu, confirm, then select the corresponding sub menu item and confirm again.
EQUALIZER
Choose from Rig. Height the adequate value for the height of the top edge of the uppermost satellite
DELAY
measured from the audience's location and the distance from the array system to the back row of
the audience (Coverage) in metres. Under Seated, enter standing (Seated OFF) or seated audience
(SeatedON). Now the optimal spreading angles for each satellite are automatically displayed. To exit
VOLUME
the menu level, select the arrow symbol and confirm the selection.
SPLAY ANGLES
SATELLITES
EQUALIZER
DELAY
SPLAY ANGLES
SATELLITES
EQUALIZER
A A
0.0 ms
A
A
4 Sat
CLIP
A
LVL GR VOL
4
Sat
<
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4
Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
SATELLITES
EQUALIZER
DELAY
SPLAY ANGLES
0°
Sat. Height
2.0 m
1°
2°
Coverage
1°
20.0 m
Seated
OFF
SATELLITES
A
AUTO DETECT m ON/OFF
SATELLITES 4
A
AUTO EQ ON/OFF
A
0.0 ms
A
4 Sat
LVL VOL
A
0.0 ms
A
4 Sat
LVL VOL
13
Rig.
5.
Cove
35
Seat
O