Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation of appliance
5
A
WARNING: Before starting the ins-
tallation, read the safety information
on user manual.
WARNING: Failure to install with
B
screws and stabilizers in accordance
with these instructions may result in
electric shock.
For the installation of the hood, please contact the
nearest Authorized Service.
It is the customer's responsibility to prepare the
location and electrical installation of the hood.
5.1 Position of the appliance
• Distance between the cooker and the cooker
hood must be considered prior to assembly. This
distance should be 65 cm.
• Distance must be measured from the surface of
grate for gas cookers,
• from surface of glass for electric cookers.
12 / EN
5.2 Installation accessories
1
4
1. Hood
2. Ø120mm Plastic Flue Flap
3. 150/120mm Plastic Chimney Adapter
4. User manual
5. Mounting Template
6. 4x 4 x 40 Screws
The information required to make the location sui-
table for the installation of the hood is given below.
5.3 Installation of the Hood
A
CAUTION: Use protective gloves
and goggles for drilling and cutting
operations.
• Paste the installing template provided with the
hood on the surface where the hood is to be
mounted.
• Make holes with Ø4 mm diameter on the points
marked as A, B, C, D on the installation tem-
plate.
• Drill the flue outlet hole specified in the installing
template in the sizes given.
• Remove the appliance from its packaging. Install
the plastic flue flaps provided in the accessories
to the air outlet flue of the appliance as shown
below.
Cooker Hood / User Manual
2
3
5
6
Werbung
