Inhaltsverzeichnis
Werbung
Web screen configurations (continued)
Chroma Level
Adjust the color intensity.
Setting range: -5 to +5
Factory setting: 0
AWB/AWB Mode
Adjust the ratio between the three primary colors (RGB) to
reproduce white accurately. If the white balance is out of
adjustment, not only will white be reproduced poorly, but the color
tones of the screen as a whole will also be degraded.
• This needs to be set when using the unit for the first time or when
the unit has not been used for a prolonged period.
• This needs to be set when the lighting conditions or brightness
changes.
Setting values:
ATW
Auto
Indoor applications with the same conditions as
sunny, outdoor applications
(Sunny)
Indoor applications with the same conditions as
cloudy, outdoor applications
(Cloudy)
Incandescent lights, video lights like in a studio, etc.
(Indoor 1)
Warm white fluorescent lights, sodium lamps like in
a gymnasium, etc.
(Indoor 2)
AWB A
Register settings suited to a shooting scene (white
AWB B
balance set), and load registered settings.
(Set)
For how to register a white balance set, refer to
"How to register a white balance set" below.
• A white balance set cannot be registered while
color bars are displayed.
Factory setting: ATW
How to register a white balance set
1) Set [AWB Mode] to [AWB A] or [AWB B].
2) Fill the screen with a white subject.
• Do not shoot shiny or very bright objects.
3) Click [Execute] of [AWB].
• When [OSD Status] is set to [On], [AWB OK] is displayed on the
screen and adjustment is completed.
• If the white balance set cannot be registered, the error message
[AWB NG] is displayed on the screen. When this occurs, use
another mode.
Flesh Tone Mode
This function enables human skin to appear smooth and more
beautiful in images.
Setting values: Off / On
Factory setting: Off
DRS
This enables the dynamic range to be expanded by compressing
the video signal level of the highly illuminated areas that get
washed out with standard recording.
Setting values: Off / On
Factory setting: Off
<NOTE>
• If there are extremely dark or bright parts or the brightness is
insufficient, the effect may not be clear.
Back Light COMP.
This makes the image brighter to prevent darkening of a backlit
subject.
Setting values: Off / On
Factory setting: Off
z Preset position screen
Perform operations and make adjustments related to preset positions.
To display the [Preset position] screen, click the [Setup >>] button of
[Preset position]. (→ page 20)
To close the [ Preset position ] screen, click the [Close] button.
Preset
Register the setting conditions you like to preset memory, and load
registered settings. (Up to 9 presets)
For details on registering and loading to/from preset memory, refer to
"Using preset memory" (→ page 26).
Zoom
Perform zoom operations.
Zooming up to approximately 2x is possible with the iA zoom
up to 4x with the digital zoom.
• For use with the PTZ Cntrl app for iPad, be sure to set 1.0x.
• For details on enabling or disabling the digital zoom, refer to "Digital
Zoom" (→ page 23).
• When PinP is displayed, switch [Control] to [Main] before beginning
operation. (→ page 21)
*
1
iA zoom: Zoom mode that maintains the beauty of HD image
quality.
Adjust the zoom (magnification) in the Wide
direction.
[‒]
Adjust the zoom (magnification) to 1.0x.
[×1.0]
Adjust the zoom (magnification) in the Tele
direction.
[+]
Control
Switch the control mode during PinP display to the main screen or
PinP.
Main
Set the control mode to the main screen.
PinP
Set the control mode to PinP.
PinP Display
Turn on or off the function for extracting part of the camera image and
displaying it in a small PinP (Picture in Picture) screen on the main
screen.
Off
Turn off PinP display.
On
Turn on PinP display.
, and
1
*
21
Werbung
Inhaltsverzeichnis
