Inhaltsverzeichnis
Werbung
Web screen operations (continued)
6.
Control pad and its buttons
Perform pan/tilt operations.
The camera images can be adjusted in the horizontal, vertical, and
diagonal directions.
• Panning and tilting are not possible when the zoom level is 1x. (→
page 17)
• When PinP is displayed, switch the control mode [Control] to [Main]
before beginning operation. (→ page 18)
Control buttons:
Control buttons
Click to perform the pan/tilt operation.
Control pad:
Click or drag to perform the pan/tilt
operation.
The nearer the click or drag operation is to
the edge, the faster the pan/tilt speed.
Control pad
<NOTE>
• When the mouse is used for dragging and dropping from the control
pad area to a position outside this area, the panning, tilting and
other operations will not stop.
In a case like this, click the control pad area to stop these
operations.
7.
Brightness [Brightness]
Adjust the brightness of the images.
You can switch between auto mode and manual mode.
Switch to auto mode.
The brightness is adjusted automatically to match the
scene.
[Auto]
Switch to manual mode.
Adjust the brightness manually when, for example,
[Manual]
shooting in a location that is too dark (light).
Make the images darker in manual mode.
This is disabled in auto mode.
[‒]
Make the images brighter in manual mode.
This is disabled in auto mode.
[+]
<NOTE>
• [Contrast Level] and [Back Light COMP.] cannot be set in manual
mode.
8.
Image resolution list box [Image Resolution]
Change the resolution of live images.
640×360
Display at resolution of 640x360.
320×180
Display at resolution of 320x180.
9.
PinP display [PinP Display]
Turn on or off the function for extracting part of the camera image and
displaying it in a small PinP (Picture in Picture) screen on the main
screen.
Off
Turn off PinP display.
On
Turn on PinP display.
10.
PinP display position [PinP Position]
Switch the PinP display position.
Display the PinP screen in the upper right of the
Upper Right
main screen.
Display the PinP screen in the lower right of the
Lower Right
main screen.
Display the PinP screen in the upper left of the main
Upper Left
screen.
Display the PinP screen in the lower left of the main
Lower Left
screen.
18
11.
Control mode [Control]
Switch the control mode during PinP display to the main screen or
PinP.
Main
Set the control mode to the main screen.
PinP
Set the control mode to PinP.
12.
Preset [Preset]
Register the setting conditions you like to preset memory, and load
registered settings. (Up to 9 presets)
For details on registering and loading to/from preset memory, refer to
"Using preset memory" (→ page 26).
13.
Camera title display area
Displays the name for the unit set in the Basic screen (→ page 20).
Werbung
Inhaltsverzeichnis
