Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. Faults
9. Faults
EN
Error mapping in the CMD48 in accordance with NAMUR NE107
Priority
High
Medium
Medium
Low
-
-
40
DANGER
Danger to life from explosion
Through working in flammable atmospheres, there is a risk of explosion
which can cause death.
▶
Only rectify faults in non-flammable atmospheres.
WARNING
Physical injuries and damage to property and the environment
caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
▶
Wear the requisite protective equipment, see chapter 2.5 „Personal
protective equipment".
For contact details, see chapter 1 „General information"or the back page of
the operating instructions.
Acronym
F
C
S
M
N
-/-
Condensed status
Failure (measured value no longer valid)
Function test (for simulation)
Outside the specification
Maintenance required (measured value still valid)
No effect
Undefined
WIKA operating instructions model T38.x
Werbung
