Abicor Binzel xFUME FLEX Betriebsanleitung Seite 30

6 Putting into operation
6.3 Establishing an electrical connection
WARNING
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• Before establishing an electrical connection between the product and the mains, check whether the operating voltage
indicated on the nameplate corresponds to the mains voltage.
The mains cable and mains plug are pre-mounted. For the mains voltage and the fuse protection, please refer to:
 3.1 Technical data on page EN-6
 3.2 Nameplate on page EN-7
 13 Appendix
1 Plug the mains plug into the mains socket.
6.4 Regulating the air volume flow
The air volume flow can be regulated manually using the lever on the right hand side of the suction funnel. If the lever is in
vertical position, the valve is open and the extracted fumes can flow uninhibited. If the lever is in horizontal position, the valve
is closed and reduces the volume flow of the extracted welding fumes.
1 Lever
Fig. 4 Regulating the air volume flow
EN - 12
1
2
2 Valve
xFUME FLEX
1
2
BAL.0733.0 • 2020-07-10