Guide Bar And Chain Combinations; Saw Chain Filing And File Gauges; Ec-Declaration Of Conformity - Husqvarna T435 Bedienungsanweisung

Guide bar and chain combinations

The following cutting attachments are approved for the model Husqvarna T435.
Length, inch Pitch, inch
12
14 3/8
16
Saw chain filing and file gauges

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw for tree service Husqvarna T435 from 2009's serial numbers and onwards (the year is clearly stated in plain text on
the type plate with subsequent serial number), is in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100-2/A1:2009, CISPR 12:2005, EN ISO 11681-2:2006.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/09/2013.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed conformity
assessment according to annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. The certificates have the numbers: 01/161/080
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 30, 2012
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
MAINTENANCE
Guide bar
Gauge, mm Max. nose radius
1,3 7 T
Saw chain
Length, drive links
Type
(no.)
45
Husqvarna H37,
52
Husqvarna H36
56
English – 39