Guide Bar And Saw Chain Combinations; Accessories - Husqvarna 225i Bedienungsanweisung

3
Vibration levels
2
Front handle m/s
2
Rear handle m/s
Saw chain/guide bar
Recommended bar lengths, in/cm
Usable cutting length, in/cm
Type of drive sprocket/number of teeth
Maximum chain speed / (Normal mode), m/s
Maximum chain speed / (SavE mode), m/s

Guide bar and saw chain combinations

The following cutting attachments are approved for
Husqvarna 225i.
Guide bar
Type Length, in
501959545 12
501959552 14
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain.
A Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
3
Vibration level, according to EN 62841-4-1. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of ± 1.5 m/s
a bar length and recommended chain type. If the machine is fitted with a different bar length, the vibration
level may vary by max ± 1.5 m/s
1860 - 002 - 30.11.2022

Accessories

Chain pitch, in Gauge, mm
3/8" mini 1.1
3/8" mini 1.1
If you are not sure how to identify the type of saw chain
on your product, refer to for more information.
2
. Declared vibration data from measurements when the machine is fitted with
2
.
225i
3.9
3.9
12-14/30.5-35.6
11-13/27-33.2
Spur/6
11.8
9.4
Saw chain
Max. nose ra- Type
dius
7T Husqvarna
H38
(581808145)
7T Husqvarna
H38
(581807952)
Length, drive
links (no.)
45
52
41