Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Husqvarna 120i Bedienungsanweisung

Guide bar and saw chain combinations

The following cutting attachments are approved for the model Husqvarna 120i.
Guide bar
Length, inch Pitch, inch
12 3/8
Saw chain filing and file gauges

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:+46-36-146500, declares under sole responsibility that the cordless
battery chainsaw Husqvarna 120i (Platform CS100EU) from 2016's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the
COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of June 8, 2011 on the "restriction of use of certain hazardous substances" 2011/65/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The following standards have been applied: EN 60745-1:2009+A11, EN 60745-2-13:2009+A1, EN 55014-1:2006,
+A1:2009+A2:2011, EN 55014-2:2015, EN 61000-6-2:2005.
Notified body:
TÜV Rheinland LGA Products GmbH, Tillystrasse 2, D-90431 Nuernberg, Germany, 0197, has carried out EC type
examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate for EC type
examination in accordance with annex IX, has the number: BM 50356394 0001
The supplied chain saw conforms to the example that underwent EC type examination.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity to the
Council's Directive 2000/14/EC, Annex V, "relating to noise emission in the environment". The certificate has the number:
01/162/002
For information relating to noise emissions, see the Technical data chapter.
Huskvarna, 27 September 2016
Lars Roos, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
32 – English
TECHNICAL DATA
Max. nose
Gauge, mm
radius
1,1 7T
Saw chain
Length, drive
Type
links (no.)
Husqvarna H38 45