Differences; Graphical View - Pce Instruments Pce-T 420 Bedienungsanleitung

6.4

Differences

If you are on one of the screens for monitoring a single channel, it is possible to compare the
measured values of the other channels with the measured value of the current channel. To do
this, use the DOWN arrow key to switch to the Differences screen. The measured value of the
current channel is displayed there and below the measured value, the differences of the measured
values of each further activated channel to the measured value of the current channel are
displayed. To leave the Differences screen, use the UP arrow key to return to the statistics screen
of the channel.
6.5

Graphical view

From the Differences screen, the arrow key can be used to switch to the Graphical View screen.
Here, the measured value of the current channel is displayed and the last measured 15, 30 or 60
seconds are shown graphically. By holding down the OK key, the graphical view can be reset.
Fig. 11 Differences
Fig. 12 Graphical view
© PCE Instruments
33