Data Logger - Pce Instruments Pce-T 420 Bedienungsanleitung

5.3

Data logger

In this menu, you can change the settings for the data logger.
5.3.1 Start condition
The data logger can be started either manually by pressing a key or automatically from a date
that is set in this menu.
5.3.2 Stop condition
Three different options are available for stopping the data logger. It can either be stopped
manually by pressing a key, on a date or after an adjustable time interval.
5.3.3 Memory interval
For the memory interval, different time intervals between 1 s and 12 h are available.
5.3.4 Show data
With the help of this function, an overview of the saved measurements can be called up. The
saved measurements can only be recalled via the PC software.
5.3.5 Delete data record
To delete individual data records, the data record must first be called up. Then the record can be
deleted by holding down the OK key.
5.3.6 Delete all data
This menu item is used to delete all saved measurements. After selecting this item, a window first
opens in which the deletion must be confirmed before the deletion process is carried out.
Fig. 6 Data logger settings
© PCE Instruments
28