Menu; Measurement; Alarm - Pce Instruments Pce-T 420 Bedienungsanleitung

5

Menu

The main menu can be opened at any time with the MENU key. The arrow keys are used to
navigate between the menu items, which can be activated with the OK key. Submenus can be
exited again with the BACK key. The main menu of the PCE-T 420 consists of the submenus
Measurement, Alarm, Data logger, Settings, Calibration, Manual and Info. The submenus are
explained in more detail in the following chapters.
5.1

Measurement

In the Measurement submenu, the options relevant for the measurement can be set for each
channel: activate channel, select thermocouple type, set offset.
5.2

Alarm

In the Alarm submenu, an upper and a lower threshold value can be set for each channel. If these
threshold values are exceeded during a measurement, this is indicated by an orange measured
value and an orange arrow in front of the measured value. If the arrow points upwards, the upper
threshold value has been exceeded. If the arrow points downwards, the lower threshold value
has been fallen below (see Fehler! Verweisquelle konnte nicht gefunden werden.).
Fig. 4 Measurement
Fig. 5 Alarm
© PCE Instruments
27