Measurement; Measurement Overview - Pce Instruments Pce-T 420 Bedienungsanleitung

6

Measurement

For different views of the measurements, the arrow keys can be used to switch between several
screens. Which arrow keys can be used on the current screen is indicated by white arrows in the
upper corners or at the bottom of the screen.
6.1

Measurement overview

After switching on the meter, the measurement overview is automatically displayed. Here, you
can see for each channel which thermocouple type is set and which temperatures are currently
being measured. If no sensor is connected or recognised by the device, "No sensor" is displayed
instead of the measured value. This allows you to always see the measured temperatures of all
activated channels at a glance.
Fig. 8 Measurement overview
If changes are made in the menu, the new settings are applied when returning to measuring mode
and are displayed accordingly. These are also retained when the instrument is switched off and
on again.
© PCE Instruments
31