ABB 364DS Betriebsanleitung Seite 70

Betriebsanleitung 364xS
gemäß CSA Standards für Übereinstimmung mit grundlegenden Sicherheitsanforderungen
C22.2
0-M1991: General Requirements – Canadian Electrical Code Part II.
0.4-M1982: Bounding and Grounding of Electrical Equipment (Protective Grounding)
0.5-M1982: Threaded Conduit Entries
25-M1966: Enclosures for use in Class II Groups E, F and G Hazardous Locations.
30-M1986: Explosion-proof Enclosures for use in Class I Hazardous Locations.
94-M1991: Special Purpose Enclosures.
213-M1987: Non-Incendive Electrical Equipment for use in Class I Division 2 Hazardous Locations.
157-M1992: Intrinsically Safe and Non-Incendive Equipment for use in Hazardous Locations.
CAN/CSA C22.2 No.1010.1-92
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1: General
Requirements (includes Amendment 1)
CAN/CSA C22.2 No.1010.1B-97
Amendment 2 to CAN/CSA C22.2 No 1010.1-92
CAN/CSA E60079-0-00
Electrical apparatus for explosive gas atmosphere. Part 0: General Requirements.
CAN/CSA E60079-1-01
Electrical apparatus for explosive gas atmosphere. Part 1: Construction and verification test of flameproof enclosure of
electrical apparatus.
CAN/CSA E60079-11-02
Electrical apparatus for explosive gas atmosphere. Part 11: Intrinsic Safety "i"
Die 364 Druckmessumformer sind von CSA für folgende Class, Divisions und Gas groups, hazardous
classified locations, temperature class und types of protection bescheinigt.
.
Explosionproof for Class I, Division 1 and 2, Groups A, B, C and D; Class II Groups E, F and G; Class
III; Enclosure Type 4X Ex d IIC.
Non incendive for Class I, Division 2, Groups A, B, C and D; Class II Groups E, F and G; Class III;
Enclosure Type 4X Ex nL IIC.
Intrinsically Safe for Class I, Division 1 and 2, Groups A, B, C and D; Class II Groups E, F and G;
Class III; Enclosure Type 4X Ex ia IIC.
Temperature class T4 to T6 (dependent on the maximum input current and the maximum ambient
temperature).
Ambient Temperature range -50°C to +85°C (dependent on the maximum input current and the
maximum temperature
class).
Electrical Supply range Minimum 10.5 Volts, Maximum 42 Volts (dependent on the type of protection,
maximum ambient temperature, maximum temperature class and communication protocol).
Type 4X applications Indoors & Outdoors.
Pollution Degree I
Installation Category II
Altitude 2000 m
Humidity 0 to 80%
Für einwandfreie Installation des Druckmessumformers 364 das zugehörige control drawing beachten.
Alle angeschlossenen Geräte müssen von CSA bescheinigt sein.
70
Sicherheit