Silvercrest SSMS 600 D3 Bedienungsanleitung Seite 11

Assembling
WARNING! RISK OF INJURY!
► Only insert the plug into the power socket after you have assembled the
appliance for use .
NOTICE
► Before the first use, clean all parts as described in the chapter "Cleaning" .
To assemble the hand blender
WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care .
■ Place the hand blender 5 on the motor unit 4 so that the arrow points to
the symbol
points to the symbol
Assembling the wire whisk
■ Press the whisk 0 into the whisk holder 9, until it firmly engages .
■ Place the so assembled whisk 0 onto the motor block 4 so that the arrow
points to the symbol
symbol
Assembling the liquidiser
WARNING! RISK OF INJURY!
► The blade 7 is extremely sharp! Handle it with great care .
■ Carefully place the blade 7 onto its retainer in the bowl 8 .
Turn the blade 7 a little until it slides onto the holder .
NOTICE
► The blade 7 is not fixed firmly in the holder . This is normal . The blade 7 is
only sits firmly when the bowl lid 6 is put on .
■ Fill the bowl with the foodstuffs you wish to liquidise 8 .
■ 8 │ GB │ IE │ NI
. Turn the hand blender 5 until the arrow on the motor unit 4
.
Turn the motor block 4 until the arrow points at the
.
SSMS 600 D3