Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Seat position
The horizontal position of the seat can and should
be set too.
You are in the optimal driving positon when your
front knee is directly above the pedal while the
crank is horizontally aligned.
The horizontal adjustment of the seat may only
be performed within the markers and within the
range specifi ed by the manufacturer.
Test whether the seat post and the seat
are fi rmly attached before you drive off.
To do this, hold the seat at the front and
back and attempt to turn it. It should not
move.
Height of the handlebars
Once the seat has been fi rmly and comfortably
positioned, the handlebars must be adjusted to
your needs.
An effective starting position for relaxed riding is
offered by a seating position in which the upper
body and arm form a 90° angle.
In order to change the height of the handlebars,
the height of the stem must be adjusted.
Allow your FLYER specialist retailer to
adjust the settings of the handlebars and
the stem.
Speedlifter Twist
The Speedlifter allows you to adjust the height
of the handlebars in only a few movements. The
Twist system makes it possible to turn the handle-
bars 90 degrees to save space while transporting
your FLYER.
Open the quick release lever of the Speedlifter (1)
1
Move the handlebars to the desired position (2).
Close the quick release lever completely to fasten
the handlebars (3).
Open the quick release lever in order to turn the
handlebars sideways (1).
1
140
2
3
Werbung
