Toro 21026 Bedienungsanleitung Seite 6

Note: If a handle lever is loose, open the lever,
rotate it clockwise 1 or 2 turns to tighten it, then
close the lever (Figure 5).
2. Installing the Starter Rope
Procedure
Pull the starter rope through the rope guide on the
handle (Figure 6).
1. Starter rope
Note: To make the rope easier to install, squeeze the
control bar on the handle.
Figure 5
Figure 6
2. Rope guide
3. Assembling the Grass Bag
Procedure
Attach the lip onto the front of the grass bag frame as
shown in (Figure 7).
1. Lip
4. Filling the Engine with Oil
Procedure
Important: Your mower does not come with oil
in the engine.
1. Remove the dipstick (Figure 8).
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full mark on the dipstick (Figure 8).
Do not overfill. (Max. fill: 0.59 l, type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
6
Figure 7
Figure 8