Parkside PPMA 20-Li B2 Originalbetriebsanleitung Seite 20

GB MT
Warning:
The vibration and noise emissions
may deviate from the specified val-
ues during actual use of the power
tool, depending on the type and
manner in which the power tool is
used – and in particular which type
of workpiece is processed.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Charging times (min.)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart PLGS 2012 A1
Notes on safety
Caution! When using power tools,
observe the following basic safety
measures for the prevention of electric
shocks and the risk of injury and fire.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.
20
PAP 20 A1
PAP 20 A2
PAP 20 B1
60 90
45 60
35 45
35 45
35 40
Charging times
The device is part of the X 20 V TEAM
series and can be operated using
X 20 V TEAM series batteries.
Batteries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
We recommend that you operate this
appliance with the following batteries only:
PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1
We recommend charging these batteries
with the following chargers:
PLG 20 A3, PLG 20 A4, PLG 20 C1,
PLG 20 C3, PDSLG 20 A1,
Smart PLGS 2012 A1
PAP 20 A3
PAP 20 B3
Smart PAPS 204 A1
120
80
60
60
50
Symbols and icons
Symbols on the device:
Warning!
Read the manual!
Smart
PAPS 208 A1
240
165
120
120
55