Nidec LEROY-SOMER VARMECA 30 Installation Und Wartung Seite 58

7.13 - EMC filter for VMA31M/32M
The filter (FLT VMA31M/32M 110) is internally mounted up
to power rating 1.1 kW.
For the power 1.5 kW, the filter is externally mounted, on
the rear of the case.
The VARMECA then conforms to the EN 61000-6-4 and
EN 61000-6-3 standards.
Connect the filter inside the front part of the VMA
31M/32M as per the rules of segregation of input and
output wires
Internal filter FLT VMA31M/32M 110
for single phase range
7.14 - EMC filter for VMA31T/32T
The filter (FLT VMA 31-32T) is externally mounted, on the rear
of the case.
The VARMECA then conforms to the EN 61000-6-3 standard.
External filter FLT VMA31T/32T
28
OPTIONS
7.15 - EMC filter for VMA33T/34T
VARMECA 33/34 drives conform to drive standard EN 61800-3
because of the EMC filter which can be integrated in the front of
the VARMECA 30 casing.
7.15.1 - Dimensions
7.15.2 - Connection
Mains supply input
(L - N terminals in single phase)
L1 L2
Entrée variateur VMA 30
Installation and maintenance - VARMECA 30
L3
Filter
3776 en - 2017.10 / n