Nidec LEROY-SOMER VARMECA 30 Installation Und Wartung Seite 36

1 - GENERAL INFORMATION
• This manual describes the characteristics and installation of the VARMECA 31ML, 31M, 31TL, 31T, 32M, 32TL,
32T, 33TL, 33T, 34TL, 34T.
• The VARMECA 30 is designed to operate in an industrial environment. When used with an external EMC filter, the
VARMECA 30 complies with standards for residential environment.
• If the run command has been enabled, the motor starts as soon as it is switched on.
1.1 - General operating principle
The VARMECA 30 is the physical association of a 3-phase
induction motor and an integrated variable speed drive.
The motor allows all kinds of mounting arrangement (foot or
flange) and can be combined with standard gearboxes from
the LEROY-SOMER range.
In the standard version, the drive with integrated control does
not require any connection other than the power supply.
1.2 - Product name (4-pole base motor)
Single-phase power supply
115V ±10% - 50/60Hz
Rating Power (kW)
31 ML 025 0.25
31 ML 037 0.37
6
GENERAL INFORMATION
Single-phase power supply
200/240V ±10% - 50/60Hz
Rating Power (kW)
31 M 025 0.25
31 M 037 0.37
31 M 055 0.55
31 M 075 0.75
32 M 090 0.90
32 M 110 1.1
32 M 150 1.5
The options may be used to broaden the application range of
the VARMECA 30.
Thanks to the advanced technology of the IGBT power module,
very high efficiency and reduced noise levels are possible.
3-phase power supply
200/240V ±10% - 50/60Hz
Rating Power (kW)
31 TL 025 0.25
31 TL 037 0.37
31 TL 055 0.55
31 TL 075 0.75
32 TL 090 0.90
32 TL 110 1.1
32 TL 150 1.5
32 TL 180 1.8
32 TL 220 2.2
33 TL 300 3
33 TL 400 4
34 TL 550 5.5
34 TL 750 7.5
Installation and maintenance - VARMECA 30
3-phase power supply
380/480V ±10% - 50/60Hz
Rating Power (kW)
31 T 025 0.25
31 T 037 0.37
31 T 055 0.55
31 T 075 0.75
31 T 090 0.90
31 T 110 1.1
32 T 150 1.5
32 T 180 1.8
32 T 220 2.2
32 T 300 3
32 T 400 4
33 T 550 5.5
33 T 750 7.5
34 T 900 9
34 T 111 11
3776 en - 2017.10 / n