Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE
LEROY-SOMER reserves the right to modify the characteristics of its products at any time in order to incorporate the latest technological
developments. The information contained in this document may therefore be changed without notice.
CAUTION
For the user's own safety, this VARMECA 30 motor must be connected to an approved earth (
terminal).
If accidentally starting the installation is likely to cause a risk to personnel or the machines being driven, it is essential to supply the
equipment via a circuit-breaking device (power contactor) which can be controlled via an external safety system (emergency stop,
detection of errors on the installation).
The VARMECA 30 motor is fitted with safety devices which, in the event of a fault, control stopping and thus stop the motor. The motor
itself can become jammed for mechanical reasons. Voltage fluctuations, and in particular power cuts, may also cause the motor to
stop.
The removal of the causes of the shutdown can lead to restarting, which may be dangerous for certain machines or installations.
In such cases, it is essential that the user takes appropriate precautions against the motor restarting after an unscheduled stop.
The variable speed drive is designed to be able to supply a motor and the driven machine above its rated speed.
If the motor or the machine are not mechanically designed to withstand such speeds, the user may be exposed to serious danger
resulting from their mechanical deterioration. It is important that the user checks that the installation can withstand it, before
programming a high speed.
The variable speed drive which is the subject of this manual is designed to be integrated in an installation or an electrical machine,
and can under no circumstances be considered to be a safety device. It is therefore the responsibility of the machine manufacturer,
the designer of the installation or the user to take all necessary precautions to ensure that the system complies with current standards,
and to provide any devices required to ensure the safety of equipment and personnel.
Leroy-Somer declines all responsibility in the event of the above recommendations not being observed.
2
Installation and maintenance - VARMECA 30
3776 en - 2017.10 / n
Werbung
