Elektro-Automatik PS 2000 B Serie Bedienungsanleitung Seite 11

About the device
4. Views
Figure 1
Figure 2
4.1 Controls & sockets
Power switch
This is used to switch the device completely on or off.
Pushbutton „Preset"
This button is used to switch the actual values display
to set values display. It is also used to activate the
control panel lock. Also see sections 5.4 and 5.5.
Display
This blue LCD presents all information at one glance.
Instruction manual
PS 2000 B Single Series
Knob „Voltage"
This knob is used to adjust the set value for the output
voltage or, in preset mode, to adjust the OVP threshold.
Mini USB socket
Here the device is connected to a PC, in order to
monitor, remotely control or update the device. See
section 8.3.
Knob „Current"
This knob is used to adjust the set value of the output
current or, in preset mode, the OCP threshold.
Date: 06-03-2011
EN
11