Rational iCombi Pro-Classic Umbauanleitung Seite 11

In order to prevent accidents or damage, the manufacturer recommends
n
that technicians attend training and safety instructions.
Safety instructions
High voltages when connecting to the mains power
Danger to life due to high voltage.
Disconnect from the power supply.
n
Make sure the unit is disconnected from the power.
n
Sharp edges on the housing
Risk of cuts on the housing when working in the unit.
Wear protective gloves.
Work steps – Modification of energy optimisation
a
The unit is voltage-free and the electrical compartment is open.
a
6-2/3: The control panel must also be opened.
1. Insert the two PCB retaining clips (2) on the back of the I/O module holder
(1).
1
2
1 | MI_2202: Energy optimisation iCombi Pro Classic
DANGER
CAUTION
11 / 104