Batavia BT-CSC001 Bedienungsanleitung Seite 10

English
k. When sawing converted timber and thin
branches always use a strong support,
such as a sawing trestle. Do not stack
timber pieces.
l. Before cutting logs, secure the logs in
position.
m. When working on sloping ground, make
sure to work facing upwards.
n. Be particularly careful when cutting
splintered wood. Splinters of wood can
be torn along by the saw chain and
increase the risk of injury!
o. Foreign objects such as nails, screws,
metal parts, sand, etc. lead to increased
wear on the guide bar and saw chain.
p. A blunt saw chain can cause overheat-
ing and damage to the motor.
q. Always pull out the battery when check-
ing the chain tension, to re-tighten it, to
mount the saw chain and to eliminate
faults! Also remove the battery if you do
not use the machine temporarily.
3. Safety instructions for chain
saws
General chain saw safety warnings:
3.1
a. Keep all parts of the body away from
the saw chain when the chain saw is
operating. Before you start the chain
saw, make sure the saw chain is not
contacting anything. A moment of
inattention while operating chain saws
may cause entanglement of your cloth-
ing or body with the saw chain.
b. Always hold the chain saw with your
right hand on the rear handle and your
left hand on the front handle. Holding
the chain saw with a reversed hand
configuration increases the risk of per-
sonal injury and should never be done.
c. Hold the chain saw by insulated grip-
ping surfaces only, because the saw
chain may contact hidden wiring. Saw
chains contacting a "live" wire may
make exposed metal parts of the chain
saw "live'" and could give the operator
an electric shock.
d. Wear hearing and eye protection. Fur-
ther protective equipment for head,
hands, legs and feet is recommended.
8
7064196-36V-Chainsaw-Ma-2202-22.indb 8 7064196-36V-Chainsaw-Ma-2202-22.indb 8
Adequate protective equipment will
reduce personal injury from flying
debris or accidental contact with the
saw chain.
e. Do not operate a chain saw in a tree.
Operation of a chain saw while up in a
tree may result in personal injury.
f. Always keep proper footing and oper-
ate the chain saw only when standing
on fixed, secure and level surface.
Slippery or unstable surfaces may
cause a loss of balance or control of the
chain saw.
g. When cutting a limb that is under ten-
sion, be alert for spring back. When
the tension in the wood fibres is
released, the spring loaded limb may
strike the operator and/or throw the
chain saw out of control.
h. Use extreme caution when cutting
brush and saplings. The slender mate-
rial may catch the saw chain and be
whipped toward you or pull you off
balance.
i. Carry the chain saw by the handle with
the chain saw switched off and away
from your body. When transporting or
storing the chain saw, always fit the
guide bar cover Proper handling of the
chain saw will reduce the likelihood of
accidental contact with the moving saw
chain.
j. Follow instructions for lubricating,
chain tensioning and changing the bar
and chain. Improperly tensioned or
lubricated chain may either break or
increase the chance for kickback.
k. Cut wood only. Do not use chain saw
for purposes not intended. For exam-
ple: do not use chain saw for cutting
metal, plastic, masonry or non-wood
building materials. Use of the chain
saw for operations different than
intended could result in a hazardous
situation.
l. Follow all instructions when clearing
jammed material, storing or servicing
the chain saw. Make sure the switch is
off and the battery pack is removed.
Unexpected actuation of the chain saw
while clearing jammed material or ser-
09-05-2022 15:33 09-05-2022 15:33