Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
A breakdown of the electrical system that occurs due to
the non-compliance of the electric regulations and VDE
regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating in-
structions, you have to meet the applicable regulations
that apply for the operation of the machine in your coun-
try. Keep the operating instructions package with the ma-
chine at all times and store it in a plastic cover to protect
it from dirt and moisture. Read the instruction manual
each time before operating the machine and carefully
follow its information. The machine can only be operated
by persons who were instructed concerning the opera-
tion of the machine and who are informed about the as-
sociated dangers. The minimum age requirement must
be complied with.
18
GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
2. Layout and items supplied (Fig. 1)
On/Off switch
1.
Safety window
2.
Spark defl ector
3.
Safety hood
4.
5.
Grinding wheel
6.
Polishing wheel
7.
Workpiece support star screw
Workpiece support
8.
Mounting holes
9.
10. Spark defl ector adjusting screw
11. Speed controller
12. Flexible shaft
13. Locking pin
14. Wrench
3. Scope of delivery
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be
allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation!
• Double-wheel grinder
• Safety glass with spark deflector
• Workpiece support
• Flexible shaft
• 100-piece aAccessories
• Original operating instructions
• Safety instructions
4. Proper use
The double-wheel grinder is a combination tool for the
grinding and polishing of metals, plastics and other
materials using the appropriate grinding wheels.
The flexible shaft is designed for the grinding, deburr-
ing, polishing, engraving, cutting, milling and cleaning
of wood, metal and plastic in modelmaking, in work-
shops and in the home. Use the tool and its accesso-
ries only for the applications described.
The machine is allowed to be used only for its intend-
ed purpose! Even when the equipment is used as pre-
scribed it is still impossible to eliminate certain residual
risk factors. The following hazards may arise in con-
nection with the machine's construction and layout:
Werbung
Kapitel
Inhaltsverzeichnis
