Maintenance And Cleaning (Easy Clean) - Fuxtec Fx-Rm Serie Original Bedienungsanleitung

Original User Manual FUXTEC FX-RM Series_de_en_fr_ita_es_rev24
Open and hold rear flap (A), then insert mulch kit (B) into the opening provided. Close rear flap (A) -
Note: A mulching blade is already mounted and does NOT need to be mounted additionally.
IMPORTANT
- regular, careful maintenance is necessary to ensure that the safety level and
1) Keep all nuts, screws, and bolts tightened to ensure that the device is in perfect working condition.
Regular maintenance is necessary for the safety and performance of the device
2) Never store the device with the tank still full in a building where escaping vapors can reach a flame,
3) Let the engine cool down completely before storing the device in closed rooms.
4) Keep the engine, exhaust silencer, and fuel tank free of grass, leaves, or excess grease. Never leave
5) For safety reasons, do not use the device when parts are worn or damaged. Parts should be replaced.
Repairing damaged parts is not sufficient. Use original spare parts. Parts that are not of the same quality
6) If the fuel tank needs to be emptied, you should do this outdoors and with the engine cold.
7) Wear solid working gloves when removing or reattaching the blade.
8) Check that the blades are firmly and evenly seated after sharpening.
9) Regularly check the self-closing protective shield and grass catcher bag for wear and tear.
10) When operating, transporting, or tilting the device, please observe the following:
- Hold the device in places that provide a firm grip. Pay attention to weight distribution.
USING THE MULCH KIT
Ready
26.

Maintenance and cleaning (EASY CLEAN)

performance of the device remain unchanged.
spark, or heat source.
containers with cuttings in rooms.
can damage the device and endanger your safety.
- Wear solid working gloves;
The mulching inserts (or also called
mulching kit) shown here depend on the
model and may differ from the
64
illustrations.