LSL 118KT15 Montageanleitung Seite 7

Assembly right side:
Step 1:
Mount rear set at main frame with M8x18 (20Nm) and use bolt adhesive.
.
Step 2:
Mount foot peg with M5 x 25mm (6Nm) and use bolt adhesive.
Step 3:
Determine the position of the rear set, then tighten the two bolts M8x20 (20Nm) of the
adjustment plate.
Foot peg with M5x25 (6Nm)
close with plastic plug
2 x M8x25 (20Nm)
tighten in your determined position
festziehen
——————————————
Rev. 01 14/03/2016
Zubehör von
2 x M8x18 (20Nm)
main frame bolts
—
Das Original
Seite 7 von 8
——