Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Important clue:
Read this instruction manual carefully and mind all warnings and tips. You should do this
work only if you're qualified; otherwise we recommend this mounting to be done by a
qualified workshop. Improperly mounting of this kit can reduce the driveability of the
motorcycle and may be a risk to your health and life. Test brake and gear shifting indoor,
after installing rear set. If anything is not operating properly or braking efficiency is poor,
testing on the road may result in death or serious injury!
Special works are marked with the following signs. Please take special care on these works.
Warning! Important mounting instruction. It shows risks to your life
and health.
Tips for mounting and maintenance or to avoid damage.
Rear sets are delivered pre-assembled! All fastening elements, which are not
used for mounting or adjusting the rear set, are fitted with tightening torque and
bolt adhesive. Those fastening elements are not mentioned in this instruction.
All mentioned fasteners, which are not secured by counter- or self-locking nuts,
should be installed with medium bolt adhesive (e.g. Loctite 243).
The tightening torques for connections to the frame refers to the manufacturer's instructions.
Use the following torques for all the other bolted connections:
M5
M6
M8
M10x1,25
Maintenance:
Periodically proof all functions during service intervals. Use particle free (no MoS
lithium or barium grease to maintain lever bushings.
Fitting:
Remove stock rear sets. The following parts will be reused for your new rear set:
brake cylinder with reservoir and joint ball, M5x12 bolt of brake fluid reservoir.
Don´t open the brake system!
——————————————
Rev. 01 14/03/2016
Fitting Instruction
P/N : 118KT15
Product : Rear Set, adjustable
Brand : KTM
Model : 1290 Super Duke R 2014-
=
6Nm
=
10Nm
=
20Nm
=
30Nm
Zubehör von
=
4.43lbf ft
=
7.38lbf ft
=
14.75lbf ft
=
22.13lbf ft
—
Das Original
)
2
——
Seite 5 von 8
Werbung
