CO/Tech RH01-E-1 Bedienungsanleitung Seite 8

3. Mount the appliance. Use an appropriate fastening
method for the wall material in question.
4. Mount the external temperature sensor in a suitable
location. Do not position it directly above the appliance.
5. Plug the appliance into an earthed electrical socket.
The appliance is now ready for use.
When the appliance is used for the first time it may emit a little
smoke and a burning smell – this is not dangerous and is
completely normal. The burning smell will soon disappear as
soon as the corrosion-inhibiting coating has been burned off.
Operating instructions
The appliance is equipped with an electronic thermostat
which switches the appliance on and off to regulate
the temperature. When the temperature in the room drops,
the thermostat switches the appliance on and when
the temperature in the room has reached the set temperature
the thermostat switches the appliance off.
Make sure that the thermostat is set correctly.
1. Set the power switch to
1, turn the thermostat
knob clockwise to turn
the appliance on and warm
the room up to the desired
temperature.
2. Check the temperature
setting.
3. Once the desired temperature
has been reached, slowly
turn the thermostat knob
anticlockwise until a "click"
is heard, indicating that
the appliance has been
switched off.
4. The operation of the appliance
and the temperature of
the room should be checked
regularly. Bear in mind that
the outdoor temperature
varies and subsequently
the indoor heating
requirement.
Note: You, the user, bear full responsibility for ensuring that
nothing freezes.
The thermostat will now automatically maintain a constant
temperature. Note: This is dependant, of course, on the size
of the room, climate and outside temperature.
8