Werbung
Safety Instructions - Informaciones de seguridad
Safety Instructions for Active Voltage Probes
When handling active voltage probes, the following basic rules must be observed.
Prior to using an active voltage probe, read the applicable manual including the safety
instructions. Keep the safety instructions and the product documentation in a safe place
and pass them on to other users. Use active voltage probes exclusively within the
measurement ranges specified in the applicable data sheets. Rohde & Schwarz accepts
no responsibility for misuse of the product. Use only the accessories supplied with the
active voltage probe.
Risk of electric shock
Do not connect an active voltage probe to any voltage that exceeds the maximum
permissible input voltage specified in the data sheet. Non-compliance with this
instruction carries the risk of an electric shock.
Make sure not to cause any short circuits when performing measurements on sources
with high output currents. Short circuits may cause injuries or burns.
Risk of injury caused by pointed object
The pins of the active voltage probes are extremely pointed and can easily penetrate
clothes and the skin.
Therefore, handle the probe pins with great care. When transporting an active voltage
probe, e.g. when carrying it in a pocket or tool bag, always use the box supplied with
the probe. To exchange a probe pin, use tweezers or pliers to avoid injuries.
1171.3200.12
E/Esp-1
Page 1
Werbung
