Herunterladen Inhalt Inhalt Diese Seite drucken

Decoration; Intended Use; Service Life Of The Device; Ce Conformity - pyrexx PX-1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PX-1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

32
After finishing the work, it is vitally
important to remember to place the
smoke alarm device back on the mag-
netic holder (Fig. 1b).
Please always observe the following:
Only when the device is located at
its intended installation site, unsoiled,
undamaged and activated is it able to
perform its potentially life-saving task
of signaling alarm.

DECORATION

The smoke alarm devices test/stop
button (Fig. 1d) is removable (Fig. 3)
and can be decorated to match the
design of the room. Please decorate
exclusively this removable surface of
the device and never any of its other
areas. Afterwards, please refasten it to
the device.
Caution! The smoke intake fins (Fig. 1c)
on the side of the device must always
be kept clear of obstruction and may
never be blocked!
en
The identification plate of the device
is found under this easily removable
cover.

INTENDED USE

Use this device exclusively for the
purpose it was designed and built
for! Any other application is not as
intended!
This device may only be used for the
following purpose(s):
• Detection of fire or smoke in private
households
• This smoke alarm device comes with
heat warning functionality. It is how-
ever not a heat detector according to
EN 54-5.
The installation and use of this device
in habitable recreation vehicles (e.g.
travel trailers) has not been tested.

SERVICE LIFE OF THE DEVICE

After 12 years at most, the end of the
service life of the device will have been
reached. Please replace the device.

CE CONFORMITY

This product has been tested
and certified according to the
Construction Products Regulation
(EU) No 305/2011 (CPR) under the
terms of EN14604:2005/C:2008 as
a building product. Production is
monitored by regular and independent
inspections of consistent compliance
with legal and regulatory requirements.
Reference number for the declaration
of performance: co_1055
SERVICE
The PX-1 is produced by
Pyrexx Technologies GmbH.
pyrexx.com/en/suppor t

DISPOSAL

According to the EU's Restriction of
Hazardous Substances Directive, this
product may not be disposed of in
household garbage. Please send the
device back to the manufacturer for
recycling or give it to the waste
management company responsible for
this in your area. Please keep in mind
that improper disposal can harm the
environment.
EN 14604:2005/
AC: 2008
1772-CPR-9308
33
en

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis