Metcal CV-PS5200 Bedienungsanleitung Seite 8

Sleep Timer
10-120 Min
10 Min Segments
°F/°C Select
System Notes
No Calibration Required.
ESD Safe – AC ground monitor detects power line ground failures
and immediately alerts the operator and shuts down the system.
Surface Resistivity – 10
Password Protection & Supervisor Setup
Changing the default password will enable Supervisor mode, allowing the Supervisor to assign three user passwords

Select

Select

Power On
Press to
Resume
Operation
Configure Audio
6 Ω -10 11 Ω

Change Password
Select user &

Assign Password

Enter User Password
• The auto sleep indicator "S" may not display with certain small tip
geometries and low temperatures.
• All hand pieces will enter Sleep Mode when placed in the workstand,
regardless of the absence of a notification on the screen. (Indicated by
the "S" symbol.)
• Hand-pieces out of the workstand and at idle power will display "S" as
to indicate the sleep timer countdown has started
Tip Cleaning
Reminder
0, 10-200 Sec
1 Sec Segments

Exit to save

Exit to save
CV Enable/Disable
Press to
Resume
Operation
Default
password:
0000

Cycle Power
Active User
=1 =2
=3
=
8