Metcal CV-PS5200 Bedienungsanleitung Seite 10

RESTRICTED TIP / LOCKOUT FEATURE - Firmware v1.60.01 +
• NOTE – In order to use this feature both the ADMIN PASSWORD MODE
and OPERATOR PASSWORD must be enabled
STEP 1: ADMIN PASSWORD MODE
a. Turn CV-PS5200 power supply ON
b. Press setup button to enter SETUP MODE
c. IN SETUP MODE, press button # 9 for ADMIN Password Protection
d. Enter 4-digit ADMINISTATOR/ADMIN/SUPERVISOR PASSWORD using the [-][+] buttons
e. Exit Setup Mode, turn unit OFF (unless proceeding with next steps)
PRESS TO ENTER
SETUP MODE
10