Belden Hirschmann GRS106 HiOS-3A-UR Referenzhandbuch Seite 1108

Tab. 72:
Id Attribute
0x6B Port Monitor
0x6C Quick Connect
0x6D SFP Diagnostics
UM Config GRS106 HiOS-3A
Release 9.4 07/2023
Hirschmann-Erweiterungen des Ethernet-Link-Objekts (Forts.)
Access
Rule
Get/Set DWORD
Get/Set USINT
Get
Data type Description
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12: Reserved (constantly 0)
13: Reserved (constantly 0)
14: Reserved (constantly 0)
15: Reserved (constantly 0)
Quick Connect on the interface
(0=Off, 1=On)
If you enable Quick Connect, then the
device sets the port speed to 100FD,
disables auto-negotiation, and Span-
ning Tree on the interface.
STRUCT of:
STRING Module-
Type
SHORT-STRING
SerialNumber
USINT Connector
USINT Supported
DINT Temperature in °C
DINT TxPower in mW
DINT RxPower in mW
DINT RxPower in dBm
DINT TxPower in dBm
Industrieprotokolle
17.2 Funktion EtherNet/IP
Link Flap (0=Off, 1=On)
CRC/Fragment (0=Off, 1=On)
Duplex Mismatch (0=Off, 1=On)
Overload-Detection (0=Off, 1=On)
Link-Speed/ Duplex Mode
(0=Off, 1=On)
Deactivate port action (0=Off,
1=On)
Send trap action (0=Off, 1=On)
Active Condition (displays which
condition caused an action to
occur)
00001 : Link Flap
B
00010 : CRC/Fragments
B
00100 : Duplex Mismatch
B
01000 : Overload-Detection
B
10000 : Link-Speed/ Duplex
B
mode
453