Belden Hirschmann GRS106 HiOS-3A-UR Referenzhandbuch Seite 1107

Industrieprotokolle
17.2 Funktion EtherNet/IP
Tab. 72:
Id Attribute
0x64 Ethernet Interface
Index
0x65 Port Control
0x66 Interface Utilization Get
0x67 Interface Utilization
Alarm Upper
Threshold
0x68 Interface Utilization
Alarm Lower
Threshold
0x69 Broadcast limit
0x6A Ethernet Interface
Description
452
Hirschmann-Erweiterungen des Ethernet-Link-Objekts
Access
Rule
Get
Get/Set DWORD
Get/Set USINT
Get/Set USINT
Get/Set USINT
Get/Set STRING
Data type Description
USINT Interface/Port Index (ifIndex out of
MIBII)
0:
1:
8:
9:
USINT The existing Counter out of the private
MIB hm2IDiagfaceUtilization is used.
Utilization in percentage (Unit 1%=100,
%/100). RX Interface Utilization.
Within this parameter the variable
hm2DiagIfaceUtilizationAlarmUpper-
Threshold can be accessed. Utilization
in percentage (Unit 1%=100).
RX Interface Utilization Upper Limit.
Within this parameter the variable
hm2DiagIfaceUtilizationAlarmLower-
Threshold can be accessed. Utilization
in percentage (Unit 1%=100). RX Inter-
face Utilization Lower Limit.
Broadcast limiter Service
(Egress BC-Frames limitation, 0=disa-
bled), Frames/second
Interface/Port Description
(from MIB II ifDescr), for example
"Unit: 1 Slot: 2 Port: 1 - 10/100 Mbit TX"
or
"unavailable", max. 64 Bytes.
Link state
(0=link down, 1=link up)
Link admin state
(0=disabled, 1=enabled)
Access violation alarm (read-only)
Utilization alarm (read-only)
UM Config GRS106 HiOS-3A
Release 9.4 07/2023