Belden Hirschmann GRS106 HiOS-3A-UR Referenzhandbuch Seite 1104

Tab. 69:
Id Attribute
0x4 Physical Link Object Get
0x5 Interface Configura-
tion
0x6 Hostname
0x7 Safety Network
Number
0x8 TTL Value
0x9 Mcast Config
0xA Selected Acd
0xB Last Conflict
Detected
Tab. 70:
Id Attribute
0x64 Cable Test
0x65 Cable Pair Size
UM Config GRS106 HiOS-3A
Release 9.4 07/2023
Attribute der Instanz 1 (Forts.)
Access
Rule
Set/Get STRUCT of:
Set/Get STRING
Get/Set USINT
Get/Set STRUCT of:
Get/Set BOOL
Get
Hirschmann-Erweiterungen des TCP/IP-Interface-Objekts
Access
Rule
Set/Get STRUCT of:
Get
Data type
STRUCT of:
UINT PathSize
EPATH Path
UDINT IpAddress
UDINT Netmask
UDINT GatewayAd-
dress
UDINT NameServer1
UDINT NameServer2
STRING DomainName
USINT AllocControl
USINT reserved
UINT NumMcast
UDINT McastStartAddr
STRUCT of:
USINT AcdActivity
ARRAY of:
6 USINT RemoteMac
ARRAY of:
28 USINT ArpPdu
Data type
USINT Interface
USINT Status
USINT
Industrieprotokolle
17.2 Funktion EtherNet/IP
Description
Path to the Physical Link Object,
constantly {0x20, 0xF6, 0x24,
0x01} describing instance 1 of the
Ethernet Link Object.
IP Stack Configuration (IP-
Address, Netmask, Gateway, 2
Name servers (DNS, if supported)
and the domain name).
Hostname (for DHCP DNS
Update)
Unsupported
Time to live value for IP multicast
packets Range 1..255 (default 1)
Alloc Control = 0
Number of IP multicast addresses
= 32
Multicast start address =
239.192.1.0
0=ACD disable
1=ACD enable (default)
ACD Diagnostic Parameters
Description
Interface
Status (1=Active, 2=Success,
3=Failure, 4=Uninitialized)
Size of the Cable Test Result
STRUCT of:
2 Pair for 100BASE
4 Pair for 1000BASE
449