Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation. The
device must only be connected with an electric installation carried out in compliance with the IEC-standards.
The electric installation must be equipped with a Residual Current Device (RCD) with a maximum fault
current of 30 mA. Lighting effects must not be connected to dimming-packs.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Number of LEDs:
LED type:
Color temperature:
Beam angle:
Cable length:
Dimensions(L x W x H):
Weight:
Please note: All information is subject to change without prior notice. 29.10.2018
12 x 7.5
90°
(Reflektor)
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
C
100-240 V AC, 50 Hz
30 W
45° C
80° C
0.5 m
0.1 m
1
30 W COB
4100 K
59°
0.9 m
620 x 135 x 85 mm
0.8 kg
410
Ø 10
600
11/12
M5
H05VV-F 3G0,75mm²
(ca. 90cm)
44
M10 x 60
00118368.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
