Parker PVD 3405D Betriebsanleitung Seite 24

RS
5. COMMISSIONING AND USE FOR TACHOMETER
5.1 GENERAL
The TBN precision tacho generators are designed for high precision speed monitoring. They supply a
voltage proportional to the speed, without delay and without additional energy.
This brochure describes the TBN 200 - 300 type.
The TBN 400 tacho is described in a separate brochure.
The TBN tachos are fitted in association with the following servomotors :
Standard typ
TBN 206
TBN 306
5.2 INSTRUCTIONS FOR INSTALLATION AND USE
5.2.1 Equipment delivery
All tachos undergo a thorough quality control procedure before dispatch:
•
Do not hold tachos by the cables
•
Check that the information on the identification plate corresponds to your order.
if the equipment has been damaged in transit, the recipient should immediately complain to the carrier
by registered letter within 24 hours.
5.2.2 Storage
Before installation, the material should be stored in a dry place without large temperature variations in
order to prevent condensation.
if it is to be stored for a long time, check that the end of the shaft and the face of the flange are always
coated with an anti-corrosion product.
diameter mrn
Ø 49
Ø 64
PVD 3405 - 01/2023
RS
RS2.....RS4
MD11-MD13
RS5+ RS6
24
AXEM
F9-Fl2
-