HOMCOM A91-032 Montageanleitung Seite 8

STEP: 3
IMPORTANT: The Backrest Supports (No. 8) must first be attached to the bar located on the
Main Seat Support (No. 3) before continuing forward on this step.
Slide the bottom ends (with holes), of the Backrest Supports (No. 8) onto each side of the bar
located on the Main Seat Support (No. 3) (see Fig. 1above). Next, lean the top ends of the
Backrest Supports (No. 8) against the Backrest Adjustment Bar (No. 6).
Place the Backrest Board (No. 11) onto the Backrest Supports (No. 8), align the holes and
secure the Backrest Board (No. 11) using 4 Washers (No. 32) and 4 Hex Bolts (No. 29).
Attach the Seat Pad (No. 10) to the Main Seat Support (No. 3) using 4 Washers (No. 32) and 4
Hex Bolts (No. 30).
7