Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board operating buttons or in DMX-controlled mode via any commercial DMX controller.
Operating buttons
MODE
ENTER
UP
DOWN
Menu structure
LCD
DMX512
Dimmer
Strobe
Temper
Stand Alone-Mode
Dimmer
Press the MODE button until the display shows "Dimmer". Press ENTER to confirm.
You can now select the desired brightness via the UP or DOWN buttons. You can choose from 4096 levels,
with increasing brightness.
Press ENTER once again to confirm. Press the MODE button in order to return to the main menu.
Strobe
Press the MODE button until the display shows "Strobe". Press ENTER to confirm
Via the UP or DOWN buttons, you can set the desired strobe speed. You can choose from 13 speeds, with
increasing rate.
Press ENTER once again to confirm. Press the MODE button in order to return to the main menu.
Temper
Press the MODE button until the display shows "Temper". Press ENTER to confirm
Here you can read out the current internal temperature of the device.
During operation, the fan does not rotate if the internal temperature is below 50°C. The fan starts rotating at
57°C.
Press the MODE button in order to return to the main menu.
Selects the operating mode or returns to the initial screen.
Activates a value to be modified or saves a value when modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
001 - 512
Setting the DMX starting address
0000 – 4096
Setting of the total brightness
00 - 12
Setting the strobe speed
Temperature indicator
Function
23/28
00139205.DOCX, Version 1.0
Werbung
